Rated Power rotary speed: 2.5kw/5000rpm (3 horsepower). Power rotary speed: 3.5kw/6000rpm (5-6 horsepower). Fuel Ration: 16:1, 20:1 after running in. Type of clutch: Friction plate Dry. 1 x Drive Chain Idler.1 x Push Clutch Lever. 1 x CD Ignition Assembly. 1 x Gas Tank (2L). 1 x Magneto With Kill Switch (on throttle). 1 x 44 Tooth Chrome Sprocket With 9 Holes. 1 x Twist Throttle And Cable With Matching Grip. 1 x All necessary mounting brackets, gaskets, and hardware. Before you install the engine, to lubricate the inner components and make the cylinder bore have a longer lifespan, you should pour some lubricating oil into the cylinder bore from the spark plug hole, then drain off the lubricating oil and install the engine. Unleaded petrol / oil mixture is necessary.
Use only synthetic 2 stroke fuel to insure proper engine lubrication. To start, move the choke lever to "on" position, hold in clutch, pedal the bike fast to get some speed, and then release the clutch gradually. To stop, slow speed, disengage clutch and apply either original brake (if you didn't remove the original left handle brake). To stop the engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.This item is in the category "eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Engines & Engine Parts\Complete Engines". The seller is "cymotor2017" and is located in this country: US. This item can be shipped to United States.