The Large Exhaust Hole Quickly Removes the Exhaust Gas, Keeps the Cylinder Low Temperature, and Prolongs the Service Life 5. The Easy-to-start Device Starts Quickly, Requires less Pulling Force, and Does Not Rebound 6. Use the Damping Spring to Slow down the Vibration of the Engine and Keep It Stable During Pile Driving.4 Stroke 38CC Heavy Duty Gas-Powered Post Driver Fence Pile Driver T Post Engine. 1Pile Driver+1Fuel Tank+1Filter Oil Nozzle+2Piling Sleeve+1Tool Kit+1Manual. Adopt Piling and Power Integrated Design, Easy to Carry, Strong Adaptability and High Piling Efficiency.
One Machine Can Be Used for Multiple Purposes. The Handle Is Comfortable, Non-slip and Shock-absorbing, Which Can Effectively Reduce Fatigue During Work.
The Large Exhaust Hole Quickly Removes the Exhaust Gas, Keeps the Cylinder Low Temperature, and Prolongs the Service Life. The Easy-to-start Device Starts Quickly, Requires less Pulling Force, and Does Not Rebound. Dam Reinforcement, Flood Control and Emergency Plugging, Pond Maintenance, Fence Reinforcement Operations (Wood Piles or Steel Pipes). Product Size: 303063cm (11.8111.8124.8inch).
Net Weight: 12kg (26.46lb). Engine Type: Air-cooled Single-cylinder Four-stroke. Fuel Tank Capacity: 0.65l.
Fuel Consumption Rate: =0.47l/H. Power and Speed:1.2kw/8500r/Min. Torque and Speed:1.2nm/5500/Min.
If the Pile Driver Has the Problem of Not Hammering: 1. Whether Too Much Butter Is Added at the Place Where the Butter Is Added, Clean up the Excess Oil in the Cylinder Before Disassembling and Re-add About 20g of High Temperature Resistant Butter. The Speed of the Carburetor Can Be Slightly Fine-tuned. If the Impact Frequency Is Too High, It Can Be Lowered If the Hand Cannot Hold It. Otherwise, the Impact Frequency Should Be Increased.
Note That It Is Fine-tuning. The Machine Is Not Easy to Start. First of All, Pay Attention to Maintenance. The Four-stroke Oil Is Added to the Oil Tank, and the White Oil Can Is Added with Pure Gasoline.
It Is Best to Change the Oil Tank Every Day. The Starter Rope Is Pulled out an Arm's Distance, and It Can Be Started by Pulling It Two or Three Times in a Row, but It Is Also Related to the Temperature, and Sometimes It Needs to Be Pulled Several Times. When the Cold Engine Starts, Close the Damper (for Good Start, the Warm Engine Can Be Opened and Start) and Open the Damper After the Machine Is Normal. Feedback is very important to us. It is impossible to address issues if we do not know about them!Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.