2-Stroke Gas-Powered Outboard Motor Kayak Boat Engine with Short Shaft CDI System
Strictly for professionals only Please note: We do not provide consumables for free (such as pulling the starter). 2-Stroke Gas-Powered Outboard Motor Kayak Boat Engine w/ Short Shaft CDI System. 2-Stroke Outboard Motor 52cc Rubber Boat Engine 2.3hp+Cdi System Short Shaft.
Replace the Gear Oil After the Running-in Period (10 Hours). Please Do Not Equip Our Outboard Engine with Gear Oil. Remember to Refuel on the Gear Before Use!!
We Can Only Provide Ce Certification, No Other Certification Can Be Provided, Thank You for Your Understanding. About Noise: All Gasoline Engines Are Very Noisy. At Present, We Have Not Tested Decibels, but the Noise Is the Same As That of Motorcycles, so This Is Normal. The Machine Itself Is Light in Weight and Can Be Used on Board No More than 100kg, with a Load of 4 People, but the Speed Is Definitely Different When People or 4 People.
Please Pay Attention to Customers Who Have High Expectations for Speed. Can March with Inflatable Boats, Rubber Boats or Fishing Boats. Necessary: You Must Prepare a Boat Motor Bracket or Hanging Plate on Board. Two Strokes of 2.3 Horsepower Are Controlled by the Handle and the Handle Is Operated by the Clutch. No Neutral, Only Idle Mode or Low Speed Mode.We Do Not Provide Consumables for Free (Such As Pulling the Starter). Full Throttle Operating Range: 8500r / Min. Maximum Output Power: 2.3hp.
Start the System: Manually Start. Staring at the Carburetor System: Choke Start. Engine and Propeller Ratio: 2:1. Recommended Fuel: Ordinary Unleaded Gasoline. (Please Note This Version and Ignore the Manual on This). Top Speed: 10 Km / Hour. Built-in Fuel Tank: 0.85l. Fuel Consumption per Hour: 1.5 Liters. Outboard Engine Overall Length: 107cm Overall Width:37cn Overall Height:26.5cm Transon Height:7cm Weight: 8. After Cruising in Sea Water or Drowning. Use Fresh Water to Clean the Outboard Motor. Circulate the Engine at Moderate Speed. Do Not Leave the Outboard Motor Outside Until You Have Completely Cooled the Water.Otherwise the Water Cam Enters the Cylinder Through the Exhaust Port. From There It Will Cause an Engine Failure. The Engine Should Be Stored in a Dry and Ventilated Place to Avoid Direct Exposure to the Sun.
You Should Use up the Gasoline in the Tank Before Long-term Storage. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.
A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "aaertu" and is located in this country: US.
This item can be shipped to United States.- * Feature *: Creative Design，Durable Material，Beautiful Appearance
- Feature 1: Easy installation,Convenient Use,Easy Operation
- Note: not ship to Canarias
- Brand: Unbranded
- Short axis: 750MM
- Full throttle operating range: 8500r / min
- Maximum output power: 2.3HP
- Speed: 10 km/h
- Type: 2 strokes
- Ignition System: CDI System
- Start the system: manually start
- Staring at the carburetor system: choke start
- Engine and propeller ratio: 2:1
- Recommended fuel: ordinary unleaded gasoline
- Fuel ratio: 25:1
- Gear ratio: 27/13
- Top speed: 10 km / hour
- Built-in fuel tank: 0.85L
- Fuel consumption per hour: 1.5 liters
- Application: inflatable boats, rubber boats or fishing boats
- Country/Region of Manufacture: China
- Modified Item: No
- Model: /