2-Stroke 100cc Bicycle Engine Petrol Gas Motor Kit Motorized Bicycle Full Set. 100CC Bike Engine Bicycle Motor Kit 2-Stroke Gas Motorized Bike Modified Fits 26'' / 28'' V-Frame. 100CC bicycle motor kit : Comes with all needed hardware for easy installation. Heavy duty metal engine body for added durability.Load capacity : 180kg Fuel Type : 90#; N. Fits for most type 26" and 28" bikes, such as mountain bikes, road bikes, cruisers, choppers. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1"). 100cc Bike Engine Kit- 50mm bore single piece cylinder, an upgraded CDI, Performance Speed Carburetor and more, high performance Speed carb, silver anti-corrosion coating, high performance CDI with Yamaha components, improved magneto, high end allen bolts, improved gas cap. Be assured the mixing ratio for fuel and oil:16:1 for break period (first 300-500 miles) / 20:1 after (18:1 is much better in summer because of the hot weather);air cylinder might take some time to adjust to the load. Thus to avoid possible complications for the motor, please limit the riding time to a maximum of 1 hour for the first few rides. We will definitely solve it for you. Spark plug wrench, fuel tank, fuel pipe, carburetor, gasoline filter, igniter, exhaust pipe, protective chain cover, guide wheel assembly, 415 chain, 44 tooth sprocket, screw accessory kit, throttle grip cover, throttle cable, Clutch line, clutch handle, flameout switch, English manual. Ignition Mode : Latest version CDI Ignition. Power : 2.5HP / 1.9KW (At 5500 r / min conditions). Lubricating oil : Two-stroke machine oil. Ratio of gasoline to 2-stroke motorcycle lubricants:16:1 for new sets, 20:1 after running 500km. Fuel consumption: Driving on flat roads at an economic speed of 20-25 km/h, fuel consumption of 3-3.5L/100 km. Speed : 48km/hFor your safety, it is recommended to drive at a medium speed! Procket: 44 Tooth Rear Sprocket. Drive chain: 415 reinforced chain. Total engine weight: 11 kg (including fuel tank and all accessories). The engine will be installed by yourself, and you will receive what you see in the pictures. It is recommended to use the matching kit in the package when installing this product. Before starting the engine, close the damper on the carburetor, and then open the damper on the carburetor after the engine is started.
When the engine is running normally, the damper cannot be closed, otherwise the engine will be stalled. Not fit for: 26 Bayside Men's Cruiser Bike. Ratio of gasoline to 2-stroke motorcycle lubricants: 16:1 for new sets, 20:1 after running 500km. No APO/FPO addresses or PO Boxes allowed. We are not responsible for undeliverable addresses.
This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts". The seller is "yourhousekeeper_kira" and is located in this country: US. This item can be shipped to United States.